SKU 94029
For technical questions, please call 1-800-444-3353.
Page 7
outlet is properly grounded. Do not modify the power cord plug provided with
the tool. Never remove the grounding prong from the plug. Do not use the
tool if the power cord or plug is damaged. If damaged, have it repaired by
a service facility before use. If the plug will not fit the outlet, have a proper
outlet installed by a qualified electrician.
DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS
1.
Tools marked “Double Insulated” do not require grounding. They have a special
double insulation system which satisfies OSHA requirements and complies with
GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS
1.
Tools and equipment marked with “Grounding Required” have a three wire cord
and three prong grounding plug. The plug must be connected to a properly
grounded outlet. If the tool or equipment should electrically malfunction or break
down, grounding provides a low resistance path to carry electricity away from the
user, reducing the risk of electric shock.
(See Figure A.)
2.
The grounding prong in the plug is connected through the green wire inside the
cord to the grounding system in the tool. The green wire in the cord must be the
only wire connected to the tool’s grounding system and must never be attached
to an electrically “live” terminal.
(See Figure A.)
3.
Your tool must be plugged into an appropriate outlet, properly installed and
grounded in accordance with all codes and ordinances. The plug and outlet
should look like that in the following illustration.
(See Figure A.)
FIGURE A
120 VOLT, GROUNDED,
ELECTRICAL OUTLET
3 PRONG PLUG
NOTE:
THIS PRODUCT IS
EQUIPPED WITH A
3 PRONG PLUG.