Page 7
For technical questions, please call 1-888-866-5797.
Item 63995
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
S
E
tup
15. Attach both Eye Bolts (21) to Ram Plate (19)
by threading Nuts (20) about 1/2″ in only.
ram plate
(19)
nut
(20)
Eye Bolt
(21)
Figure L
16. Guide Press Pin through Press Pin Guides
and let Ram Plate rest on Top Cross Beam.
17. Align the assembled press. Square the bottom
frame and tighten it. Level the top frame and
square all components, then tighten all connections
securely, except for Eye Bolts.
WarninG! press
apron Support pins (7) must be centered.
press
pin
Figure M
18. Pull up on Ram Plate and attach Eye Bolts to Springs.
19. Push Ram Piston all the way down, then
place Ram (31) on Ram Plate.
note:
If more space is needed to
install Ram, loosen Eye Bolts.
20. When Ram is in place, tighten Eye Bolts evenly,
making sure the Ram Plate remains level.
21. Install Ram Handle (8) and pump it until Piston is
seated firmly in Piston Ring. Verify alignment, then
tighten Eye Bolts as needed. Verify the Jack is in
line with the Ram and all connections are tight.
22. Place Arbor Plates (14) on Press Apron (15).
23. Follow instructions in
Bleeding the Ram on page 8.
piston
piston
ring
arbor
plates (14)
Figure n
24. Locate Shop Press on a solid, level surface,
capable of supporting the weight of the
Shop Press and the workpiece.
ram
Handle
(8)
press apron
Support pins (7)