Item 67090
For technical questions, please call 1-888-866-5797.
Page 3
9.
Keep the equipment and surrounding area
clean at all times.
10. Use the equipment, accessories, etc., in
accordance with these instructions and
in the manner intended for the particular
type of equipment, taking into account
the working conditions and the work to
be performed. Use of the equipment for
operations different from those intended
could result in a hazardous situation.
11.
Moving parts can crush and cut
hands and fingers. Keep hands
clear of the Ram Plate, Wedge,
and logs while splitting.
12. Be thoroughly familiar with all controls and
with the proper use of the Log Splitter.
Know how to stop the Log Splitter and
relieve system pressure quickly if needed.
13. Make sure all fittings are tight before
applying pressure.
14. Be aware of the added length of the Log
Splitter when transporting.
15. If a log becomes jammed in the Wedge,
back off pressure and remove log with a pry
bar.
16.
Figure A
CORRECT
LOG
ORIENTATION
INCORRECT
LOG
ORIENTATION
This Log Splitter is designed to split logs
up to
18″ long and 6-1/2″ in diameter,
lengthwise
with
the grain only. (See
Figure A.)
17. Always operate the Log Splitter with all
safety equipment in place and in proper
working order, and all controls properly
adjusted for safe operation.
18. Always relieve the system pressure before
inspecting, cleaning, adjusting, or repairing
the Log Splitter.
19. When spills of fuel or oil occur, they must be
cleaned up immediately. Dispose of fluids
and cleaning materials as per any local,
state, or federal codes and regulations.
Store oil rags in a bottom-ventilated,
covered, metal container.
20. Keep hands and feet away from moving
parts. Do not reach over or across
equipment while operating.
21. Before use, check for misalignment or
binding of moving parts, breakage of parts,
and any other condition that may affect the
equipment’s operation. If damaged, have
the equipment serviced before using. Many
accidents are caused by poorly maintained
equipment.
22. Use the correct equipment for the
application. Do not modify the equipment
and do not use the equipment for a purpose
for which it is not intended.
23. Keep all safety guards in place and in
proper working order.
24. Never add attachments to the Log Splitter,
except for authorized accessories supplied
by the manufacturer with instructions for
safe installation and use.
25. Use the Log Splitter only in daylight so you
can see what you are doing.
26. Never attempt to change the height or
speed of the splitting Wedge.
27. Maintain labels and nameplates on the Log
Splitter. These carry important information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
28. Have the Log Splitter serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the equipment is maintained. Do
not attempt any service or maintenance
