Page 4
For technical questions, please call 1-800-444-3353.
SKU 34951
its intended function – check for
alignment of moving parts, binding
of moving parts, breakage of parts,
mounting, and any other conditions
that may affect its operation. A guard
or other part that is damaged should
be properly repaired or replaced.
DIRECTION OF FEED. Feed work
20.
into a blade or cutter against the
direction of rotation of the blade or
cutter only.
NEVER LEAVE TOOL RUNNING
21.
UNATTENDED. TURN POWER OFF.
Don’t leave tool until it comes to a
complete stop.
grOunDing instructiOns
tO preVent
electric sHOck
anD DeatH FrOm
incOrrect grOunDing
Wire cOnnectiOn
reaD anD FOllOW tHese
instructiOns:
110-120 V~ grounded tools: tools
with three prong plugs
In the event of a malfunction or
1.
breakdown, grounding provides a
path of least resistance for electric
current to reduce the risk of electric
shock. This tool is equipped with an
electric cord having an equipment-
grounding conductor and a grounding
plug. The plug must be plugged into
a matching outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
Do not modify the plug provided –
2.
if it will not fit the outlet, have the
proper outlet installed by a qualified
electrician.
Improper connection of the
3.
equipment-grounding conductor can
result in a risk of electric shock. The
conductor with insulation having
an outer surface that is green with
or without yellow stripes is the
equipment-grounding conductor. If
repair or replacement of the electric
cord or plug is necessary, do not
connect the equipment-grounding
conductor to a live terminal.
Check with a qualified electrician or
4.
service personnel if the grounding
instructions are not completely
understood, or if in doubt as to
whether the tool is properly grounded.
Use only 3-wire extension cords that
5.
have 3-prong grounding plugs and
3-pole receptacles that accept the
tool’s plug.
Repair or replace damaged or worn
6.
cord immediately.
125 V~ 3-prong plug and Outlet
(for up to 125 V~ and up to 15 a)
grounding
pin
This tool is intended for use on a
7.
circuit that has an outlet that looks
like the one illustrated above in
125
V~ 3-prong plug and Outlet
. The
tool has a grounding plug that looks
like the plug illustrated above in
125
V~ 3-prong plug and Outlet
.
reV 06l, 09g
Brought To You By Augusta Flint
