SKU 99887
For technical questions, please call 1-800-444-3353.
Page 5
TO PREVENT
SERIOuS INjuRY
FROM aCCIdENTaL
OPERaTION:
Release any load from the
Motorcycle Lift before
assembling or making any
adjustments to the unit.
Note:
For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Attach the two Base Legs (12) to the
1.
Post (19) using four Bolts (11) and
four Spring Washers (10).
(See Figure a.)
FIGuRE a
POST
(19)
BaSE LEG
(12)
BaSE LEG (12)
BOLT
(11)
SPRING
WaSHER
(10)
2. Attach the Upper Linkage (16) to the
Post (19) using one Bolt (6) and one
Nut (14). Attach the Lower Linkage
(5) to the Post (19) using one Bolt (6)
and one Nut (14).
(See Figure B.)
FIGuRE B
POST
(19)
BOLT
(6)
uPPER
LINKaGE
(16)
NuT
(14)
NuT (14)
LOWER
LINKaGE
(5)
BOLT
(6)
3. Attach the upper portion of the Arm
Lift (13) to the Upper Linkage (16)
using one Bolt (6) and one Nut (14).
Attach the lower portion of the Arm
Lift (13) to the Lower Linkage (5) us-
ing one Bolt (6) and one Nut (14).
(See Figure C.)
Attach the Jack Bracket (3) to the
4.
Lower Linkage (5) using one Shaft
(22) and one Nut (14).
(See Figure d, next page.)
FIGuRE C
aRM LIFT
(13)
BOLT (6)
LOWER LINKaGE
(5)
NuT
(14)
NuT
(14)
uPPER LINKaGE
(16)
BOLT
(6)
