SKU 94835
For technical questions please call 1-800-444-3353
Page 6
supplying Air pressure to the rolling jack
Pressurized air supplied to the Foot Pedal / Hydraulic Pump Assembly (26)
is converted to hydraulic pressure. The hydraulic pressure passes through the
Hydraulic Hose (33) and activates the Hydraulic Ram (12). The Hydraulic Ram
activates the Scissor Assembly (15 and 16) which in turn lifts the Top Strut (10)
with its Saddles (3). This operation will lift your vehicle or other work item.
1. The Foot Pedal / Hydraulic Pump
Assembly (26) is supplied with a
male quick-release air adapter, as
shown in the photo.
2. Attach your air hose with a suitable
female quick-release air adapter
to this male adapter. Adjust your
air supply pressure to 90-120 PSI.
cAutiOn:
Do not exceed 120 PSI,
as this may damage the jack.
3. To operate the Rolling Bridge Jack,
press down on the lower portion of
the pedal marked “PUMP”. The jack
will begin to rise. To lower the jack, press on the portion of the pedal marked
“ReLeASe”. The jack will begin to lower.
wArning: Keep feet, hands any part of your body, any other person or
animal or any equipment away from the scissor Assembly (15 and 16)
when raising or lowering this jack. severe personal or property injury
may result from items being pinched in the scissors assembly or related
components during operation of this jack.
4. The air hose used should be of good quality, and in good condition. The air hose
should be routed to the jack in a way that will not cause a tripping hazard. The
air hose should not be allowed to be near the scissor assembly. The air hose
may be detached and put away when the Rolling Bridge Jack is not in use.
The Foot Pedal / Hydraulic
Pump Assembly (26)
male quick-release
air adapter
PUMP
ReLeASe
