SKU 54877
For technical questions, please call 1-800-444-3353.
Page 4
SPECIFIC SAFETY RULES
1.
WARNING! Do not exceed the maximum lift capacity (3 Tons / 6,000
pounds) for this Floor Jack. Overloading the Jack could cause serious
personal injury and/or property damage.
2.
The Floor Jack is designed for intermittent use only. Do not use the Jack
to support a vehicle over extended periods of time. The duration of the lifting job
should be kept as short as possible.
3.
Maintain labels and nameplates on the Floor Jack. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
4.
Prior to using the Bottle Jack, make sure to read and understand all
warnings, safety precautions, and instructions as outlined in the
manufacturer’s instruction manual for the vehicle (or object) you will lift.
5.
When lifting only one wheel, make sure to support the load immediately
with one jack stand (not included) placed under the side of the vehicle being
lifted. Align the saddle of the jack stand directly under the vehicle’s seam or a
recommended lifting point.
6.
When lifting the entire front end or rear end of a vehicle, make sure to
support the load immediately with two jack stands. Align the saddles of the jack
stands directly under the vehicle’s frame or recommended lifting points. Also make
sure the jack stands are adjusted at the same height.
7.
Make sure the Floor Jack is used only on a dry, oil/grease free, flat, level,
ground surface capable of supporting the weight of the vehicle being
lifted and any additional tools and equipment.
8.
Do not work under the vehicle without properly supporting the vehicle with
jack stands. Make sure the load and jack stands are stable before getting
under a vehicle.
13.
When servicing a tool, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of injury.