background image

Sku 46766

       For technical questions, please call 1-800-444-3353.

Page 5

Bolt (12)

Bolt (12)

Washer (34),
Spring Washer (35)

Supports (11)

Nut (2)

Nut (2)

Washer (34),
Spring Washer (35)

Figure 3-Supports to Support Post

Step 5)

Attach the Handle Grip (36) to the Support Post (10).  Slide a Washer (6) and a Spring
Washer (7) onto each of four Bolts (27).  Insert the Bolt (27) and Washers (6 and 7) through
Handle Grip (36) and tighten to Support Post (10) - see Figure 2.

Step 6)

Attach the Hydraulic Ram (21) to the bracket located toward the bottom of the Support Post
(10) - see Figure 4B below.  Insert Bolt (17), then slide on Washer (32) and Spring Washer
(33).  Tighten on Nut (18).  Lean the Hydraulic Ram (21) against the Support Post (10) while
installing the Boom (13) in next step.

Step 7)

Set the Boom (13) onto the top of the Support Post (10).  Insert Bolt (14) through the holes,
then slide on Washer (30) and Spring Washer (31).  Tighten on Nut (26) - see Figure 4A.

Boom (13)

Bolt (14)

Nut (26)

Washers (32 & 33)

Figure 4A -Assembling the Boom

Support Post (10)

Hydraulic
Ram (21)

Bolt (17)

Support
Post (10)

Bolt (22)

Nut (18)

Washers
(32,33)

Washers

(32,33)

Nut (18)

Support Post (10)

Figure 4B-Attaching the Hydraulic Ram

REV 11/02; 05/05

Summary of Contents for 46766










Reviews: