SKU 99707
For technical questions, please call 1-800-444-3353.
Page 2
Keep hands clear from stapling area while
4.
Hammer Tacker is in use.
Maintain product labels and nameplates.
5.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
assemblY and operatIng
InstructIons
read the entIre Important
saFetY InFormatIon section at the
beginning of this document including
all text under subheadings therein
before set up or use of this product.
loading staples
Plastic Magazine
Opener (21)
Magazine
Assembly (22)
Figure 1
1.
Use only 1/4” to 1/2” length T50 18 gauge
staples.
Press down on spring-loaded Plastic
2.
Magazine Opener (21) at bottom of Handle
(25)-see Figure 1.
Slide lever away from the Handle (25).
3.
Extend Magazine Assembly (22) from
4.
Handle-see Figure 1.
Load with 1/4” to 1/2” length LT50 18 gauge
5.
staples. Make certain to load staples with
staple tips facing downward.
Push Magazine Assembly (22) back into
6.
Handle.
Slide Plastic Magazine Opener forward to
7.
lock Magazine Assembly into place.
operation
Make certain free hand is clear of section to
1.
be stapled.
Hammer the Tacker to insert staple.
2.
maIntenance and cleanIng
removing Jammed staples
If staples become jammed in the driver, do
1.
not repeat stapling until they are removed
from the unit.
Grasp the jammed staple with needlenose
2.
pliers and pull staple out from the Driver
Blade (14).
beFore eacH use,
3.
inspect the general
condition of the Hammer Tacker. Check for
loose screws, misalignment or binding of
moving parts, cracked or broken parts, and
any other condition that may affect its safe
operation.
aFter use,
4.
clean external surfaces of the
tool with clean cloth.
Tacker
Handle (25)