12
12
Zephiro Fog 3000 User Manual
Eng
5.1. Control Mode
DURATION
INTERVAL
OUTPUT
MIN
MAX
MIN
MAX
MIN
MAX
TIMER
ON/OFF
CONTINUOUS
FOG
MANUAL
FOG
A
B
2
1
3
4
5
6
8
7
9
Wireless
Controller
WIRED
CONTROLLER
1) Wired control
Connect the controller to the machine rear panel through the 5-pin XLR connector.
1. Interval selection knob: Adjusts timespan between two timer active steps.
2. Duration selection knob: Determines the duration when timer is active (fog
emission).
3. Output intensity knob: Adjusts fog emission from 0% to 100%.
4. Timer function on/off switch.
5. Continuous fog switch: When active, the machine emits fog continuously. Re-
lease the button to stop it.
6. Manual fog switch: when pressed, the machine emits fog at the output intensity
selected by knob at point 3.
7. Timer function on/off - when pressed, the timer is disabled (yellow Led is off)
8. Manual fog indicator - during emission (button 6 pressed) this Green Led is on.
9. Continuous fog function on/off - when continuous fog button (n. 5) is pressed,
this red Led is on.
