Centeron
®
Digital Two Channel Monitor Instruction Manual
Robertshaw Industrial Products
Page 1
1.0 Introduction
This manual describes how to install, test, and service the Centeron
®
Digital Two Channel
Monitor. The Digital Two Channel Monitor is part of the Centeron
®
Level Monitoring
System that includes the High Level Alarm Console or a Controller used with a Data
Collection System. Throughout this manual, the High Level Alarm Console or Controller
will be referred to generically as the Receiver. This guide does not include how to install,
test, maintain or troubleshoot the Receiver(s) or Data Collection System. Refer to these
products’ respective instruction manuals. The description herein is based on a standard
installation.
2.0 Product Overview
2.1 Description
The Digital Two Channel Monitor is a member of Robertshaw’s Spread Spectrum Radio
Frequency (RF) product family. This Monitor detects alarm status, temperature, low
battery, and system status and broadcasts these data to the system’s Receiver. The
Monitor is pre-programmed at the factory with the Transmitter ID, Property Code, and
Transmission Frequency. No field programming of the Monitor is required.
2.1.1 Product
Markings
Included on the housing of the Monitor are labels that contain important information
about the product.
Figure 1: Monitor Label Product Markings
