Safety Information for User & Installer
Important information for fitter:
Installation information
• It is recommended that only approved/qualified plumbers should install the product.
• Incorrect installation of the enclosure will invalidate guarantee.
Safety information prior to and during installation
• Carefully check the product for transport damage prior to installation.
• Never install damaged panels as there is a risk of spontaneous glass breakage.
• The supplied fixings/wall plugs are
only
for mounting directly on solid walls.
• It is essential that the solid, masonry/walls be inspected for adequate load-bearing capacity prior to every installation.
• The supplied fixings/wall plugs are
not for use
with stud walls such as plaster board, wood, metal or fiber board.
•
Always seek professional advice to confirm wall type and appropriate type of fixing to be used for installation.
• Always check walls for concealed utility lines (power, gas, and water) prior to drilling the fixing holes.
• Ensure that fittings will not hinder the movement of the door as this may cause glass breakage.
• For hinge/pivot doors ensure that toilet bowls, wash-stands or other objects are outside of the door opening area.
Special information on handling glass
• Always protect all glass edges from damage.
• Never stand the glass on its corners throughout the installation! Place the packing material beneath the glass panel;
never place the glass on tiles, concrete floors or similarly hard surfaces
• It is mandatory to check each glass panel for damage prior to installation. Never install damaged glass panels as this
could cause spontaneous glass breakage!
• If the glass panel is damaged during use it must be replaced without delay. (Failure could cause a risk of spontaneous
glass breakage!)
Prevent damage to glass or operation of the product.
• Ensure fittings do not hinder the movement of the door.
• Ensure that no objects are within the range of the door opening/ closing area.
• Avoid hitting the panels with hard objects such as mops when cleaning or tools during assembly. Damaged panels
must be replaced as failures may cause latent glass breakage.
• Do not hit against the glass edge with hard or pointed objects (e.g. with mop handle) Damaged panels must be
replaced; damage may cause spontaneous glass breakage.
• Do not use panels or handles to hang or support items such as drying towels or clothes.
Hazard information for special groups of people
• Do not allow small children, sick or disabled persons to shower unattended.
• A strong magnet is attached in the closing profile of some of the panels. This magnet could affect a pacemaker. Keep
a minimum distance of 15 cm from the magnet. Consult insulation guide for location of magnets.
Maintenance Information
Service/repair and inspection required for safety
• After cleaning, check all the moving elements are sufficiently greased, re-grease, if necessary. Only use acid-free
grease. We recommend silicone grease or standard household Vaseline.
Cleaning
Do not use steam cleaners, caustic or aggressive cleaning and scouring agents, cleaners that corrode
plastics, or solvents containing acetone or turpentine or neat bleach.
• Do not use any cleaning agents, which according to the manufacturer's specifications may corrode aluminum or light
alloys.
• Do not use glass cleaning pastes and micro-fiber cloths to prevent damage to glass coating system.
• In order to prevent the build-up of lime scale, remove any remaining drops of water after showering using a squeegee,
soft cloth without any cleaning agent.
• After use, carefully rinse off all residue such as; liquid soaps, shampoos, shower gels or similar cosmetic product with
water to avoid deposits.
Important:
Never apply the cleaning agent for longer than necessary. After cleaning, check all the moving elements
are sufficiently greased, re-grease, if necessary.