CENNTRO METRO Series, User Manual

Page: 24 / 36

7. Operation

Inspection before driving
Each time before driving, the driver should inspect the following items to ensure the vehicle is safe, otherwise, it might lead
to risk of accident.
Item
Note
Accelerator Ensure proper operation
Brake system/brake peddle Ensure proper operation
Brake fluid Ensure proper fluid level
Indicators lamp/switches Ensure working
Head lamp Ensure working
Brake lamp/rear lamp Ensure working
Turning signal Ensure working
Mirror Adjust mirror to be able to see rear view
Horn Ensure working
Safety belt Ensure it is not worn, ensure the tongue work proper
Steering column Ensure free movement
Tires Inspect surface and tire pressure
Shafts
Ensure all shafts work properly
Batteries Ensure terminal are clean
Batteries cables Inspect for proper connection
Wheel & fasteners Ensure no loosen screw and bolts

Procedures on driving
1.Disconnect charging cable
2. Wear safety belt when seated on the driver seat. Ensure passenger buckle the safety belt.
3. Adjust rear mirror, if necessary
4. Turn ignition key clockwise
5. Step on brake pedal
6. Release parking brake, set the gear selector to “N”
7. Select turn signal left or right, if necessary
8. Check surrounding to ensure no obstacle
9. Hold the steering wheel with both hands, lift off the foot from brake pedal
10. Step the accelerator to move the vehicle
Procedure on driving
1.Indicate turning signal either left or right, before making a turn
2. The driver must have at least two hours of driving experience before he can take passenger, the driver must always ensure
passenger wears safety belt.
3. Stop the vehicle, lift off the foot from accelerator, apply brake to stop the vehicle.
4. Pull parking brake, set the gear selector to “N”,
5. Turn ignition key anticlockwise, lock the vehicle door.