Page 5
SKU 97389
For technical questions, please call 1-800-444-3353.
SPECIFICAtIOnS
Maximum Range
8.235”
Materials
Stainless Steel
Scale Type
Mechanical Dial
Scale Readings
Decimal markings in inches
(SAE)
Measuring Capabilities
Inside / Outside/ Depth / Step
Maximum Throat
1-31/32”
Caliper Accuracy
+/- .001”
unPACkIng
When unpacking, make sure that item is intact and undamaged. If any parts are
missing or broken, call Harbor Freight Tools at the number on the cover of this manual.
OPERAtIng InStRuCtIOnS
Read the EntIRE IMPORtAnt SAFEtY
InFORMAtIOn section at the beginning of this
manual including all text under subheadings
therein before set up or use of this product.
Please note: Calipers with dials can jump
a setting. Always double-check a reading.
Make sure upper and lower Outside Diameter Jaw
1.
(2) faces are clean. See
Fig. A
.
Loosen Slide Scale Lock (6) by turning it
2.
counterclockwise.
Use Thumbroll (1) to close Outside Diameter Jaws (2).
3.
Sliding Index Edge (7) should line up at “0.”
4.
To adjust (if needed), loosen the Dial Adjustment Lock
5.
(3) by turning it counterclockwise.
Set the Dial (5) by turning the Dial Adjustment (4) either
6.
clockwise or counterclockwise until the Dial Needle
points to “0”.
Lock the Dial (5) on its “0” setting by tightening the Dial
7.
Adjustment Lock (3) clockwise. The Caliper is ready
to use.
Figure A
2
6
1
7
3
5
4
REV 08l
