background image

Page 39

For technical questions, please call 1-888-866-5797.

Item 64981

Record Serial Number Here: 
 

Note:

  If product has no serial number, record month and year of purchase instead�

Note:

  Replacement parts are not available for this item�

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules�  These limits are designed to provide 
reasonable protection against harmful interference in a residential installation�  This 
equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications�  However, there is no guarantee that interference will not occur in a 
particular installation�  If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna�

- Increase the separation between the equipment and receiver�

- Connect the equipment into an outlet on a circuit different 
from that to which the receiver is connected�

- Consult the dealer or an experienced radio/TV technician for help�

Summary of Contents for 64981









































Reviews: