Page 9
For technical questions, please call 1-800-444-3353.
Item 60666
SAFETY
O
PERA
TION
M
AINTENANCE
SETUP
Using Hose Adapters
1. Three adapters are included with the Power Pack that
can be attached to the Tire Inflator.
(See Figure F.)
Figure F
2. Attach the proper adapter to the Tire
Inflator for the object to be inflated.
3. Insert the adapter into the object’s
receptacle and press down the lever.
4. Push the Compressor Switch to the “I” (ON) position.
Note:
Monitor the Air Pressure Gauge on the
front of the unit to avoid over-inflation.
5. When the proper inflation level has
been reached, push the Compressor
Switch to the “O” (OFF) position.
6. Lift the lever and remove the hose.
WARNING! Do not overinflate any object.
Running/Charging DC Appliances
1. Press the Battery Test Button to verify that the
Power Pack is fully charged. Recharge as needed,
following the instructions in the Setup section under
“Charging the Power Pack” on page 6.
2. Make sure the total wattage of the appliance
or appliances is within the range of the
Power Pack. See Setup section under
“DC
Appliance Compatibility” on page 6.
3. Make sure that the Clamp Power
and appliance are off.
4. Plug the appliance into the 12VDC Outlet.
5. Turn on the appliance.
6. When finished using, turn off and
unplug the appliance.
Summary of Contents for 60666
Page 1: ......
