Page 5
For technical questions, please call 1-888-866-5797.
Item 59492
Operation
1. Plug the supplied cable into
display unit and rear of scale.
2. Put the scale on a flat level surface
before weighing any items.
3. Press the POWER button once.
When “0” appears on the display,
the Scale is ready for weighing.
4. If the number shown is not
“0” before weighing, press
TARE button to reset to “0”.
NOTE:
The default unit is lb./oz.
5. Press MODE
to select the measuring unit.
NOTE:
The scale will automatically
switch to kg when the weight
is larger than 1000g.
6. Gently place item to be weighed
in the middle of platform. The
weight will appear on the display.
NOTE:
“ERR” will appear on
display if scale is overloaded and
will power off after 10 seconds.
NOTE:
Units are automatically
saved after powering off.
Hold Button
1. Press HOLD button to lock
the weight. The LED will show
“hold” in the upper left corner.
2. Press HOLD again to unlock
or it will automatically unlock
after 60 seconds.
3. To turn off Scale, press POWER
button. If using batteries, the scale
will turn off in 90 seconds
if there is no operation.
Tare Button
1. To weigh item in a container,
place container on Scale
and press TARE button.
2. Add item to container.
