Page 2
For technical questions, please call 1-888-866-5797.
Item 63612
Specifications
Probe Type
Needle-point w/ cap, 1.75″ L
Voltage Range 6/12/18/24/36 DC
Lead Wire
48″ in length, included with each tester
Battery
AA
Bulb
Bulb A
: 1.1V, 2W
Bulb B
: 12V, 3W
Bulb C
: 36V, 3W
IMPORTANT SAFETY INFORMATION
1.
Keep work area clean
. Cluttered
areas invite injuries.
2.
Check for damaged parts
. Before using
any product, any part that appears damaged
should be carefully checked to determine
that it will operate properly and perform its
intended function. Check for any broken or
damaged parts and any other conditions that
may affect its operation. Replace or repair
damaged or worn parts immediately.
3.
Replacement parts and accessories
. When
servicing, use only identical replacement parts.
Use of any other parts will void the warranty.
4.
Always check hardware and assembled
parts after assembling.
All connections
should be tight and hardware tightened.
5.
Keep children away.
Children must
never be allowed in the work area. Do
not let them handle the Circuit Testers.
6.
Dress properly
. Wear restrictive hair
covering to contain long hair.
7.
Use eye protection
. Always wear ANSI approved
impact safety goggles when using this product.
8.
Maintain product with care
. Store the
Circuit Testers in a dry location.
9.
There are certain applications for which these
Circuit Testers were designed.
Do not modify
these Circuit Testers and do not use them for
a purpose for which they were not intended.
10.
Do not use the Circuit Testers if under
the influence of alcohol or drugs.
Read warning labels on prescriptions to
determine if your judgement or reflexes are
impaired while taking drugs. If there is any
doubt, do not use the Circuit Testers.
11.
Maintain labels and nameplates on the Circuit
Testers.
These carry important information. If
the labels are unreadable or missing, contact
Harbor Freight Tools for replacement.
12.
The Circuit Testers should be
kept away from children.
13.
Working in the vicinity of lead-acid batteries
is dangerous.
Batteries generate explosive
gases during normal battery operation.
For this reason, it is of utmost importance
that each time before using these Circuit
Testers you read and understand all safety
warnings and precautions as outlined in
this manual and those manuals published
by the battery and vehicle manufacturers
and manufacturers of any equipment you
intend to use in the vicinity of the battery.
14. Make sure someone is within range of your
voice and close enough to come to your aid
when you work near a lead-acid battery.
15.
Keep plenty of fresh water and soap nearby
in case battery acid contacts skin, clothing,
or eyes.
Avoid touching eyes while working
near a lead-acid battery. If battery acid contacts
skin or clothing, wash immediately with soap
and water. If acid enters the eyes, immediately
flood eyes with running cold water for at least 10
minutes and get medical attention immediately.
16.
NEVER
smoke or allow a spark or flame in the
vicinity of a lead-acid battery or vehicle engine.
17.
Use caution to reduce the risk of dropping a
metal tool onto a lead-acid battery.
The tool
may spark or short circuit the battery or other
electrical part that may cause an explosion.
18.
Remove personal metal items such as
rings, bracelets, necklaces, and watches
when working with a lead-acid battery.
A
lead-acid battery can produce a short circuit
current high enough to weld a ring or other
metal item, causing a severe burn.