4
(*) Depending on the type of the wood, it is also possible to drill larger diameters.
For specific applications, please contact
Cembre
.
1.1) A mechanical interlocking switch
to prevent accidental starting of the machine.
Releasing the switch automatically stops the machine.
1.2) Emergency lever for quick auger release
: if necessary, this lever allows immediate release
of the auger from the machine, which can then be removed from the working area.
1.3) Adjustable Depth gauge
: a graduated scale on the fixed guard enables the desired hole
depth to be set, which automatically stops the traverse of the auger.
1.4) Adjustable main handle:
for convenience the main handle incorporating the machine
controller in the right hand grip,
may be fixed in two different positions.
ENGLISH
SD-10E
SD-10E2
SD-10E-110
SD-10E2-110
25 mm
200 mm
1600 rpm
single phase, double insulation class 2
1800 W
protection against overheating caused by a curent overload
and against unintentional start up following a drop in voltage,
thermal cut-out and underpower relay.
see Fig. 7 page 52
18 kg
see APPENDIX "A" page 20
Max. drilling capacity (*):
Max. drilling thickness:
Speed without load:
Electric motor:
Supply:
Power rating:
Automatic switch:
Space dimensions:
Weight:
Air Noise:
Risks due to vibration:
220 / 230 V - 50 Hz
110 / 120 V AC-DC
DRILLING MACHINE TYPE:
ATTENTION
the degree of protection of the drilling machine against the moisture
is classified "ordinary" (EN 501444-1 Standard). Do not expose the drilling machine to rain
and moisture; possible infiltrations of water inside the electric motor determines the risk of
electric shocks.
Mobile electric devices used outdoor must be connected to the supply by interposing a safety
interrupter for breakdown current.
DISCONNECT always the power supply before any intervention on the drilling machine:
change the auger and so on...
DRILLING MACHINE FOR WOODEN SLEEPERS
1. GENERAL CHARACTERISTICS