3
GENERAL CHARACTERISTICS
The
Cembre
LD-41PNY
drill powered by HONDA 4-cycle engine can be stored and continuously op-
erated in full 360° inclination, thanks to the rotary-slinger pumping lubrication system.
– Drilling capacity:
...................................................................................................................... Ø 9/40" to 1 9/16"
(with special twist drill bits: hole diameters of 9/32" to 1-1/8" on rails up to 3 1/2" thick)
(with broach cutters: hole diameters of 3/4" to 1-1/2" on rails up to 2 3/4" thick)
– Speed without load:
.............................................................................................................................n° 230 rpm
– Gear sump:
– Recommended oil: ................................................ SHELL SPIRAX S4 TXM
or
...................................................................................... MOBIL SUPER MULTIGRADE 10-30-SAE
or equivalents
– Weight:
(LD-41PNY) .....................................................................................................................................35.9 lbs
– Weight:
(LD-41PY) ........................................................................................................................................... 43 lbs
– Combustion engine (
EPA/CARB compliant):
– Type: ............................................................................................4-cycle, overhead camshaft, single cylinder
– Model: .....................................................................................................................................Honda GX35NT STSC
– Operating angle: .............................................................................................................................................infi nite
–
Displacement: ....................................................................................................................... 2.18 cu-in (35,8 cm
3
)
– Power (SAE J1349): .................................................................................................. 1,0 kW (1,3 HP) / 7000 rpm
– Fuel tank capacity: ............................................................................................................0.16 US gal (0,63 litre)
– Clutch: ................................................................................................centrifugal with automatic intervention
– Start: ..........................................................................................................................................................by rope pull
– Ignition: ............................................................................................................................. transistorized magneto
– Spark plug: .............................................................................................NGK CM5H or CMR5H or equivalents
– Fuel: .............................................................................................unleaded regular grade gasoline ( see § 12)
– Recommended oil: ..................................................................................................SAE 10W-30, API SJ or later
– Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
–
The continuous equivalent weighted level (A)
of noise pressure at the working place L
pA
is equal to .............................................................. 96,2 dB (A)
– The maximum value of instantaneous weighted noise
pressure C at the working place L
pCPeak
is ......................................................................................< 130 dB (C)
– The level of noise force produced by the machine L
WA
is equal to ................................................................................................................................................101,9 dB (A)
– Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1.)
Tests carried out in compliance with the indications contained in EN ISO 5349-1/2 and UNI EN 28662-1
Standards, and under operating conditions much more severe than those normally found, certify
that
the weighted root mean square in frequency of the acceleration the upper limbs are exposed
is 2,69 m/sec
2
.
1. RAIL DRILL TYPE LD-41PNY