background image

9

–  Using a 10 mm spanner, remove 8 nuts (22) and relevant washers (21).
–  Remove 4 studs (18), releasing the broken blade (2).
–  Position the new blade, insert 4 studs (18), fi t 8 washers (21) and light tighten 8 nuts (22).
–  Insert the latch spring (24) into the spacer (19).
–  Reassemble the latch (4) and fully tighten the 8 nuts (22).
–  Fit the head assembly to the head support using the pin (14) and circlip (16).

5.   CONNECTION  TO  COMPUTER

The memory card integrated in the tool records operating data  for transfer via the USB cable supplied. 
To view and manage this data, go to 

www.cembre.com 

and register in the dedicated area, then 

download the free 

Cembre

 software

 CEM_SWBT01

Keeping the Firmware of the tool updated, via free of charge download from here, will optimise 
the tool’s performance.

CBA-MTMK

Screw

FIG. 7

B-TC250YNA

To access the mini-USB 

port (Ref. to fi g. 8) and connect the USB 

cable to the computer it is necessary 

to remove CBA-MTMK battery adapter. 

Remove the screws (Ref. to fi g. 7 and 7a) 

and slide the adapter out.

mini-USB 

FIG. 7a

FIG. 8

B-TC250YNA

USER INFORMATION in accordance with “Directives 2011/65/EU and 2012/19/EU.

The ‘Not in the bin’ symbol above when shown on equipment or packaging means that
the equipment must, at the end of its life, be disposed of separately from other waste.
The separate waste collection of such equipment is organised and managed by the manufacturer.
Users wishing to dispose of such equipment must contact the manufacturer and follow the prescribed 
guidelines for its separate collection. Appropriate waste separation, collection, environmentally compat-
ible treatment and disposal is intended to reduce harmful environmental eff ects and promote the reuse 
and recycling of materials contained in the equipment. Unlawful disposal of such equipment will be sub-
ject to the application of administrative sanctions provided by current legislation.

–  Following information applies in member states of the European Union:

Summary of Contents for B-TC250YA













Reviews: