Page 11
2.4 Location of Installation
Lasers can be installed to either mounting plates (Figure 2-4) or adjustable mounting brackets
Figure 2-4 Mounting Plate -
Front
Mount the front plates to the walls first. After attach the MAXX-700
laser units to the plates.
Figure 2-5 Adjustable
Mounting Bracket - Front
The adjustable mounting bracket for the front can be used to install
all of the units. This is highly recommended for ceiling-mounted
crosshair lasers (
MAXX-700 CH
) as well as sagittal lasers (
MAXX-700
S
)
Figure 2-6 Adjustable
Mounting Bracket - Side
The adjustable mounting bracket for the side can be adjusted to a
maximum degree of 45°.
CAUTION -
The location of the laser units are determined in relation to the therapy machine’s crosshair
and isocenter. Before installing the laser units, ask the physicist to verify that the field light aligns properly
with the machine’s isocenter.
MAX 45⁰
