PhysIcal
Size
- Board Only 192 x 145 x 20mm
(7.6” x 5.7” x 0.8”)
- Enclosure
460 x 250 x 90mm
(18” x 10” x 3.5”)
Weight - Board Only 0.1Kg
- Enclosure
5.00kg
Housing
Wall mount 1.2mm steel enclosure
Colour
Grey
Power Board Only:
- Voltage
9 – 14Vdc
- Current
Consumption 170mA (excluding locks and heads)
Enclosure:
- Voltage
220-230 VAC 50/60Hz
- Current
Consumption 200mA (excluding locks and heads)
Backup Battery
Integral charging circuit provided with
enclosure and space battery
(Battery not supplied)
Environmental
- Temperature -10º to 55°C (14° to 133°F)
LED Indicators
Power, Link to host, Comms Tx/Rx, Fault /
Tamper, Lock and Relay Status
FunctIOnalIty
Inputs
* Door Position
* Lock Status
* Exit Push Button
* General Purpose
Power Fail
Tamper
Battery Low (reported internally)
Dedicated Power Fail Input
* = 4 state tamper protected inputs
Outputs
Two Relays rated at 30V@5A
Two 12V open collector outputs
limited to 1.5A (Door Lock and
External Sounder)
Reader capacity
2 Weigand/Mag Stripe interfaces
(data/data, clock/data)
Configuration
Operational parameters are downloaded
from host computer
Database memory
1GB SD Card
Cardholders
Storage up to 200,000 cardholders
at the door
Transactions
Up to 50,000 transactions in offline
operation
RTC Battery Backup
3.0V rechargeable Lithium-
Configuration
Operational parameters are downloaded
from host computer
cOmmunIcatIOn IntERFacE
To Readers
Weigand/Mag Stripe interface
(data/data, clock/data)
Connection
2 part screw terminals
To System Host
10/100 Base-T TCP/IP using CAT5
Unshielded twisted pair cable
Connection
RJ45
PROduct cOdEs
DCM/300/004
DCM 300e (Board Only)
DCM/300/101
DCM 300e (Includes enclosure, board &
power supply/battery charger)
CEM Systems Ltd Unit 4 Ravenhill Business Park Ravenhill Road Belfast BT6 8AW Northern Ireland
Tel: +44 (0)28 9045 6767 Fax: +44 (0)28 9045 4535 email: [email protected]
www.cemsys.com
PRODUCT HIgHLIgHTS
CEM/A/051/ Rev B
Product specifications and availability is subject to change without notice. Certain product names mentioned herein may be trade names
and/or registered trademarks of their companies.
tEchnIcal sPEcIFIcatIOns
host communications
The DCM 300 has an on-board 10/100 Mbps Ethernet allowing
it to communicate directly with the AC2000 host central
system.
On-board card Reading technologies
The DCM 300 supports a wide range of head technologies
using the two available on-board Wiegand connections.
Supported card technologies include Wiegand 26bit, CEM
37bit, Mifare, Corporate 1000 and many more.
Off-line card Validation
The card database is initially downloaded to the reader’s
memory from the host computer with subsequent changes to
card data automatically sent as updates. This ensures that
the reader has up-to-date card information when operating in
off-line mode. Operating in off-line mode the reader can hold
up to 200,000 cards.
Easy to Install
The DCM 300 is designed to be extremely easy to install.
The installer simply enters the units preconfigured IP address
on the AC2000 workstation, provides it with power, connects
to an Ethernet network and the reader self-configures
and receives up to 50,000 cardholder database in under 2
minutes.
