SPC series
3
3
OPERATION
3.1.
GENERAL INSTRUCTION
1
．
When battery goes low, the indication
will be turned on automatically. It is the time to charge
the battery with the AC power. If SPC goes on being used without proper charging, the display window
will show “
BAT LO
” every 5 minutes, and SPC would be shut down automatically after 30 minutes of
warning in order to protect the battery. Please charge the battery immediately, or SPC cannot be used.
2
．
The display window will show color of orange when battery is being charged, and it will turn to color
green when battery is fully charged.
3
．
Before starting using ASP, please check if the bubble is in the middle of the level ; if not, please make
appropriate adjustment.
3.2.
BASIC OPERATION
3.2.1
Zero the scale
When there is no item on the scale but reading is not zero, press the ZERO key to turn on ZERO
indicator. When the weight goes over 10 % of the full capacity, “read zero” function is obsolete.
3.2.2
Tare
Put container on the platter, once the weight reading is stable, press the TARE key, the TARE
indicator will be on and the container’s weight will be deducted. When it is time to clear the TARE,
take off the container, and press TARE key again.
3.2.3
Overload Warning
Please do not add item that is over the maximum capacity. When reading “
—OL—
“ and hear beeping
sound, remove the item on the platter to avoid damage to the load cell.
3.2.4
Unit price setting
To trade with your SPC scale, it is necessary to setting a unit price of the goods, SPC then uses this
unit price to determine how much that goods are on the platter.
When SPC scale displaying the weight of the goods placed on the scale, set the unit price through
numeric keys. Set unit price is showed in UNIT PRICE window display, TOTAL PRICE window
display shows the total price of the goods. To cancel the previous unit price, press CANCEL key .
3.2.5
Change unit
You can use the UNIT key to change unit(kg/100g). Press UNIT key will change the weighing unit
circularly, and the pertinent indicator will on.
3.3.
UNIT PRICE MEMORY
The scale model SPC can store 10 sets unit price.
3.3.1
Save the unit price
Hold the PLU key for 3 seconds after you key in the unit price, it will show “
save pos
PS
0-9
” ,
press numeric key 0~9 to select which memory location you want to use. After you do, the unit price
is stored in the scale.
3.3.2
Load the unit price
If you want to use the unit price stored in the scale, press PLU key, SPC will shows “
load pos
PL 0-9
”, press numeric key 0~9 to select which memory location’s price you want to use, current
unit price will change to the value stored in the memory.
