The vents can be adjusted up or down to direct the airflow as desired.
Operating your Fan
USING THE ICE PACKS
Lift up the water tank. Loosen the screw on the filter cover.
Pull off the water filter cover and remove the water filter.
Place the ice packs in the freezer and make sure that they are frozen thoroughly.
Place the ice pack back into the bottom of the air cooler.
Replace the filter cover and replace the screw on the filter cover.
Completely fill the air cooler with water as per the water filling instructions.
The water consumption rate of the air cooler varies depending on room temperature and
relative humidity.
Please keep the water level in the tank at an appropriate level so that water can continue to
flow into the reservoir in the unit. As it gets near to empty, fill it up again.
Place the cooler on a dry, level and sturdy surface.
Ensure the speed control is at OFF position before plugging the power cord into the socket.
Connect the USB data cable to an adapter, then plug it into the back of the unit and the other
end into a 100-240 volt AC electrical outlet, Or Connect the USB cable to a computer.
The unit is ready for use.
Power:
Press the Power button to turn the unit On.
Speed:
With the unit switched on, repeatedly pressing this button selects between High,
Medium and Low fan speed. The selection is shown by the panel lights.
IMPORTANT! NEVER COVER THIS APPLIANCE!
