SETTING THE TIME ON YOUR DIGITAL DISPLAY
While holding the CLOCK button down:
Press the WEEK button until the display shows the current day.
Press the HOUR button until the display shows the current hour.
Press the MIN (Minute) button until the display shows the current minute.
SETTING THE MODE
The AUTO function will cycle ON and OFF as per the program set.
To change the current program between ON, OFF, AUTO ON, AUTO OFF press the ON/AUTO/OFF
button until the desired program is set on the screen.
PROGRAMMING YOUR TIMER
Press the PROG (Program) button once, the display will look as shown below:
Now you must set the time at which you want your heater to turn on:
The number "1" in the display indicates you are now programming EVENT 1.
Press the WEEK button until the display shows the day in which you want the heater to turn on.
The options are:
•
One day of the week (any day from MON to SUN)
•
Every weekday (MON-FRI)
•
The weekend (SAT-SUN)
•
Every weekday plus Saturday (MON-SAT)
•
Alternating days (MON, WED, FRI)
•
Alternating days (TUE, THU, SAT)
•
First 3 days (MON-WED)
•
Second 3 days (THU-SAT)
•
Every day of the week (MON-SUN)
PROGRAMMING MULTIPLE TIMER EVENTS
Press the HOUR and MIN buttons to set up the time of day when you want the heater to turn on.
Press the PROG button again, the display shows as below. Now set the time of the day when you
want the heater to turn off.
Repeat the program procedures above for each event (up to 7 events required if you set each
individual day)
When the programming is complete, press the CLOCK button to return to the current time display.
REVIEWING YOUR PROGRAM
In the current time display, press the PROG button repeatedly to check your settings.
When finished, press the CLOCK to return to current time display
