background image

Operating Your Electric Blanket

Your Celcius Electric Blanket is equipped with a 3 Heat Control.
Two controls are supplied with the Double/Queen, King and Super King Size Blankets.

Important instructions: Retain for future use.

BEFORE FIRST USE:

NOTE: This Electric Blanket is to only be used as an under blanket.

Before using your Electric Blanket for the first time:

The Electric Blanket needs to be unfolded and laid flat before switching on.

We recommend that you switch your Electric Blanket to the maximum setting for two to three
hours before bedtime then reduce to your desired heat setting 15 minutes before getting into
bed, you must switch OFF prior to sleeping.

CAUTION:

Ensure the power cord is not tight because if pulled it may

partially pull the plug from the socket. A partially inserted plug will overheat
the plug and socket and could result in fire.

EVERYDAY USE

With normal use your Electric Blanket will require 15 minutes of preheating before bedtime.

IMPORTANT: Your Electric Blanket is designed to pre-heat your bed.

Never sleep with Electric Blanket turned on.

NOTE: Children under the age of 3 are not to use this appliance due to their inability to react to
heat.
NOTE: This appliance is not to be used by young children over the age of 3 unless the controls
have been pre-set by a parent or guardian, or unless the child has been adequately instructed on
how to operate the controls safely.

Not to be used by very young children (0-3 years)

3 HEAT CONTROL

The control features a rotary switch to adjust the heat setting.

1  Low, Gentle Heat

2  Medium Heat

3  High Heat

Summary of Contents for CELEBTD-DQ













Reviews: