WALL-MOUNTED ELECTRIC FIREPLACE/HEATER
BFM EUROPE LTD Page 9
CAUTION! THE UNIT’S POWER CORD MUST BE CONNECTED TO A PROPERLY
EARTHED AND PROTECTED 230V OUTLET. ALWAYS USE EARTH FAULT PROTECTION
WHERE REQUIRED BY THE ELECTRICAL CODE.
This appliance can be operated by both a remote control and a manual keypad. Once the unit has been
properly connected to an earthed electrical socket-outlet ensure the manual On/Off switch, located on
the right hand side of the appliance, is in the ‘ON’ position.
MAUNAL ON/OFF SWITCH
This switch turns the appliance on/off. The manual on/off switch must be in the ‘ON’ position when
using both remote and manual operation.
WARNING! DO NOT OPERATE THE UNIT IF IT IS DAMAGED OR HAS MALFUNCTIONED. IF
YOU SUSPECT THE UNIT IS DAMAGED PLEASE CALL A QUALIFIED SERVICE TECHNICIAN TO
INSPECT AND TO REPLACE ANY PART OF THE ELECTRICAL SYSTEM IF NECESSARY.
The Fireplace/Heater Unit
On the top right side plate of the fireplace/heater unit is the control panel. This panel contains the
buttons to properly operate the fireplace/heater unit. Refer to below figure for placement of the control
buttons.
The first button on the control panel is the (1) Main Power button which is used to switch the
appliance ON and OFF
OPERATING INSTRUCTIONS
