Celsi B-127740 Homeowner'S Instructions & Operating Manual Download Page 13

Page: 13 / 16

3.EF.39.Rev. 1.0

5.2.4.2 How to change the Flame Speed

Press the ‘FUNC’ button as described above to
display the

flame speed

icon on the screen.

Press the

buttons to change the

flame

speed

. There are five flame speeds to choose

from and you will see the speed change as you

scroll through the selections. Once the desired speed is selected
wait for 3 seconds for the on screen icon to disappear.

The

flame speed

is now set.

5.2.4.3 How to change the Volume

Press the ‘FUNC’ button as described above to
display the

volume

icon is on the screen.

Press the

buttons to change the

volume

There are 6

volume

settings to choose from

(including mute) and you will hear the

volume

change as you scroll through the selections. Once the desired

volume

is selected wait for 3 seconds for the on screen icon to

disappear.

The

volume

is now set.

5.2.4.4 How to change the Brightness

Press the ‘FUNC’ button as described above to
display the

brightness

icon on the screen.

Press the

buttons to change the screen

brightness

. There are 3

brightness

settings to

choose from and you will see

brightness

change

as you scroll through the selections. Once the desired

brightness

is selected wait for 3 seconds for the on screen icon to disappear.

The

brightness

is now set.

NOTE:

In daylight conditions this brightness change may appear quite subtle

Summary of Contents for B-127740

















Search results

Summary of Contents for B-127740

Reviews:

Related manuals for B-127740

Brands by name

Popular brands

Celsi B-127740, Homeowner'S Instructions & Operating Manual

Search results

Summary of Contents for B-127740

Reviews:

Related manuals for B-127740

Brands by name

Popular brands