40
44
Installations
2.5.1.2
USB Storage
If you have a USB memory stick, you can update the firmware from it
by performing the following steps:
①
Download a new firmware from the Azbox web site.
②
Copy the firmware file to your USB memory stick.
③
Insert the USB memory stick into the USB port of the digital
receiver.
④
Select the Settings > System Information > Firmware
Upgrade menu, then the files in the USB memory are listed.
⑤
Place the highlight bar on the right firmware version and
press the OK( ) button.
⑥
The receiver will be rebooted automatically to upgrade your
firmware.
⑦
Please wait for the installation.
⑧
After installation, the receiver will be rebooted again. Now
you can use the receiver with upgraded version.
NOTE:
The maximum data transfer rate of each USB port (USB 2.0) is 40Mbps
(5MB/Sec) and maximum current is 500mA. Therefore, if you use
external USB storage device exceeding this current peak, the external
USB device may not work properly and you may have to use external
power for the USB device.
40
Summary of Contents for TD210SPP series
