Cello C20230DVB-LED, User Manual

Page: 16 / 46

14
I
Turning the TV on for the First Time
1. .
Connect one end of the RF coaxial cable to the
aerial socket on the wall and the other end of the
cable to the Aerial socket at the rear bottom of your
TV.
Do not connect the TV to the mains supply
until you have completed all the connections.
2.
Connect the mains cable to the mains socket after
you have completed all the connections.
3.
At this stage, the TV switches to standby mode.
The red LED indicator will illuminate
on the front panel of the TV
.
4.
In standby mode , press the standby button on the
TV or the (!) button on the remote control to turn
the TV on. The LED indicator will change from red to
green.
mains power
100 · 240V AC 50 · 60Hz
•••1 - - ff -•• -EJ
RF coaxial cable
(not included)
Power
tiJ
Headphone out PCAudioin VGA
@
(jl
SCART
DigitLfudio
e
• Always disconnect the TV from the mains socket when not in use for a long period of time.
The standby button on the top of the TV or the (!) button on the r emote control is only used for
switching the TV into standby, it does not disconnect the TV from the mains power . To completely disconnect the
mains power, please remove the mains cable from the mains socket .
5.
If
this is the
first time you are turning on the TV and there are no programs in the TV memory,the Quick Start
menu
will appear on the screen . There are 4 setups as follow :
Setup 1 : Select your language.
Quick Start
- 1 -
language :
English
Fran<,ais
Italiano
Espanol
Nederlands
Setup 3 : Select your Auto Power
off
preference .
Quick Start
- 3 -
Setup 2: Select your Country .
- 2 -
Setup 4 : Select your TV service
Quick Start
- 4 -
Auto Power Off :
Never
The TV will automatically
1 Hour
TV Connection :
Please select the method of
ATV
Freevlew
switch off after the selected
time has elapsed .
2 Hours
This setting can also be
4 Hours
changed in the main menu.
• Previous Page
TV Connection .
Cable
• Previous Page
Country :
UK
France
Italy
Spain
Netherland
• Prevtous Page
I