5
Connection
1. Mounting the bracket
• Mount the bracket on the wall or ceiling
2. Assembly
• Hook the safety wire of the housing on the hole of the bracket.
• Push the cables to the hole of the housing and extract on the opposite side. (Fig.A)
• Connect the housing and bracket. (Fig.B)
• Assembly the PTZ mechanism. (If the assembled product was delivered, refer to “3. Connector
Connection”)
- Confirm the direction of the pin connector. (Fig.C)
- Tighten the 2 screws on the PTZ mechanism after assembling.
3. Connector Connection
Refer to the table on p.6
4. Setting an IP address
Refer to p.7~8 “Network”
<Fig.A. Cabling>
<Fig.B. Housing Connection>
<Fig.C. PTZ mechanism
Assembly>
Fixing Screw
Guide Rail
Hook
Hook
<Connector - Outdoor>
<Connector - Indoor>
