5. Press the “Fan
power ON/OFF”
button.
6. Select the Fan
Speed to start.
7. Press the “Misting
ON/OFF” to start
misting.
8. Adjust the mist density
by turning the “Misting
volume control”.
IONIZER OPERATION
Press the "Ionizer Button" (Feature No. 10) on the control
panel or (Feature No. 32) on the remote controller once
to release the anions. Illuminated light is on the control
panel will indicate function is currently in operation.
Press the same button to turn the function off.
TIMER OPERATION
1. Press the "Timer Button" (Feature No. 9) on the
control panel or (Feature No. 30) on the remote
controller to set the countdown timer. The unit will
operate with its present settings until the timer
counts down.
2. Timer can be set from 1 to 8 hours.
3. Once set, LED display will show the time set.
4. To switch off the timer function and operate the
unit continuously, press the timer button until LED
display switches off and the LED light on the control
panel above timer button LED will also be off.
REMOTE CONTROLLER
1. Open the remote control battery flap (Feature No.
33) and insert 2 pieces 1.5V "AAA" size of dry battery.
2. Remote controller must be aimed at the sensor
(Feature No. 16) on the front of the appliance,
distance within 5 meters, and will not function
from beside or behind the appliance.
CLEANING AND MAINTENANCE
(SEE DRAWING 3)
1. Ensure the unit is switched off and disconnected
from a power source before cleaning.
2. Clean outer casing or control panel with a damp
cloth only - do not use any abrasive cleaners or
harsh chemicals, and ensure the control panel or
LED is out of reach of water.
3. Check the condition of misting and water tank before
every use.
4. After long time operation with this appliance, the
unit may become clogged with dust and dirt, which
will greatly affect the performance of the unit.
Sometimes mold and mildew may also occur due
to the water tank not regular cleaned, recommend
to clean once every two weeks.
5. Remove the drain plug (Feature No. 21) and allow
the water tank to empty.
6. If the unit is being stored
for a long period of time
without use, empty the
water tank before storing
or
transporting the un it.
DRAWING 3
DRAWING 2
MIN
MAX
Warning :
1. Low Water Level Alarm: when water level becomes
low, you will hear the “beep” sound and the “Mist
Indicator” will flash continuously.
At the same time the power of the
pump inside the unit will be cut
off to protect the life of the pump.
To stop the alarm, turn off the
unit from the power
outlet. Fill the tank
with water and turn
on the unit again.
2.
DIRECT POUR WATER INTO
MIST FAN IS PROHIBITED.
(SEE DRAWING 2)
OSCILLATION OPERATION
To start 360° air flow direction, press the "Fan
Oscillation Button" (Feature No. 13) on the control
panel or (Feature No. 28) on the remote controller once;
LED light(Feature No.4) will become illuminated on the
control panel and the rotary fan grill will begin to rotate,
directing air in a full circle. This setting will be memorized
and keep unit next operation. Press the same button to
turn off the function.
and press fan power ON/OFF button, select the fan
speed to start and press "Misting ON/OFF Button"
(Feature No.11) on the control panel or (Feature
No.29) on the remote controller to switch the misting
on or off; illuminated lights on the control panel will
indicate the functions currently in operation.
5. Adjust the mist density, turn the "misting control
volume"(Feature No.18) clockwise to increase the
mist density or anti-clockwise to decrease the mist
density, then get an optimum mist performance as
required.
6. It may take a minute for a new misting fan to start
the misting, it is normal for air to come out of the
nozzles before water and the mist.
