Cellini CAP200W, User Manual, Page: 6 / 16

6
Operation of Remote Controller
1. Child Lock Button
The Child Lock function enables the air purifier to be locked, (which will also lock the
power button), and avoid any accidental operation by children or unauthorized usage. To
reset the unit to unlock Mode, the unit needs to be switched off and switched on again.
During locked mode, the lock indicator will be shown on the display.
2. Auto Function Button
The Auto function button, which is on the remote controller, allow the UV light and Ionizer
function to be switched on at a 30 minutes intervals.
3. Time Setting Button
Press the Time Setting Button , the flashing signs of clock and 0:00 will appear on
the LED screen. Press “+” or “-” for desired time setting, the time will increase from 30
minutes to 8 hours. Once the desired time has been set, press the time button to
activate. The sign of clock and 0:00 will then light up steadily. If the time setting button is
not pressed, the time set will not be activated. To reset the time, you may press the time
setting button again.
4. Sleep Mode Button
The Sleep Mode Button will enable the unit to work in low speed mode with the sleep
indicator light displayed on the unit and the fan speed mode indicator light dimmed.
5. The usage of the Power button , UV Light and Ionizer as well as the Fan
Speed Mode buttons on the remote controller are the same as those on the unit’s
control panel.
Notice
1. Please take off the isolating plate of the batteries before usage of the remote controller.
2. Please direct the remote controller to the IR receiver window on the unit.
3. Take out the batteries from the remote controller if it is not in use for a long time.
IR signal receiver
TIMER
SPEED SLEEP
AUTO
UV
&
ANION
LOCK
LOCK
TIMER
TIMER
TIMER
TIMER
SLEEP
UV
&
ANION
SPEED