16
Energy Saver Button To activate and deactivate the “Energy Saver” mode, press
the “Energy Saver” button
The “Energy Saver” indicator light (Row 3) will turn on when
the cooling unit is in “Energy Saver” mode
In the “Energy Saver” mode, the Minimum Set Point will
increase 4°F
Quick Chill Button
To activate the “Quick Chill” mode, press the “Up” / “Quick
Chill” button for three seconds
To deactivate “Quick Chill”, press “Quick Chill” button for
three seconds again
The “Quick Chill” indicator (Row 3) light will turn on when the
cooling unit is in “Quick Chill” mode,
In the “Quick Chill” mode, the cooling unit will run
continuously for 6 hours (or until the intake temperature
registers 50°F). This mode is useful after loading “warm”
bottles in a cellar
Up and Down
Buttons
To view the “High Temp” recorded by the cooling unit, press
the “Up” button once.
To view the “Low Temp” recorded by the cooling unit, press
the “Down” button once
To reset the “High Temp” or “Low Temp”, press the “Set”
button for three seconds while “Hi” or “Lo” is displayed.
“RST” will blink three times to indicate confirmation.
Auto Defrost Mode
The cooling unit periodically checks the temperature of the
evaporator coils as measured by Probe 2 (P2) and initiates an
auto-defrost cycle if the coils drop below 38
°
F. When the
cooling unit is in auto-defrost mode, the “Auto-Defrost”
Indicator light (Row 2) will turn on
Summary of Contents for 1800QT
Page 1: ......
