CONTROLLER FUNCTION
PA BROADCAST
Light Output
Siren Tone
Air Horn
1. At any moment, short press once to activate or inactivate all Light
Output #1 & #2 together.
2. While all light outputs are activated, press to activate only Light
Output #1.
3. While only Light Output #1 is activated, press again to deactivate
all Light Output.
NOTE:
Siren will deactivate when Light Output #1 is deactivated.
PA Activation
Press “Push-to-Talk” button on the side of the Mic to activate
PA broadcasting. PA broadcasting will override all current
Siren Tone. Action will resume when PTT is released.
1. While Light Output #1 is activated,
■ quick press once to active the siren tone in Full Power (Day Mode).
■ long press once to active the siren tone in Low Power (Night Mode).
2. While siren is activated, press again to cycle through all available tones (if applicable).
3. To switch between Day / Night Mode, long press while the siren is activated.
4. To deactivate, quick double press while the siren is activated.
NOTE:
Siren will deactivate when Light Output #1 is deactivated.
1. Press and hold for Air Horn tone.
2. Air Horn with override all current siren tone.
Mic Volume Adjustment Knob
(available on selected mic model only)
The knob located on the top right corner of the controller will
adjust mic volume (high or low). Turn clockwise for high
volume; turn anticlockwise for low volume.
- 6 -
Mic Volume
Adjustment Knob
PTT
PTT
Clip-on Mic
Handheld Mic
“ON
→
Output
#1 & #2
→
Output
#1
→
OFF
”
