4
Use the mounting brackets as a template and mark the holes with a pencil
on the wall. Then drill holes according to the markings with an 6mm drill and
insert the dowels into the holes. Attach the mounting brackets to the wall with
the universal screws (c)
2. Lift the screen housing with two people and insert it carefully into the
mounting bracket. Make sure that the housing profiles engage in the hooks of
the mounting brackets. Now slowly slide the housing downwards and release
it only when the housing is actually held by the bracket.
Installing the screen
1. Hold the housing in
front of the bracket and
push it from below with
the upper edge against-
the bracket head so that
the bracket is located in
the housing groove.
2. Slide the housing
towards the wall until
it noticeably sits on the
hooks.
3. Once the housing is
securely seated on the
bracket, tighten the lower
safety screw clockwise.
This closes the bracket
and makes the screen
secure.
1. For installation on a solid stone / concrete ceiling,
please use the plastic dowels (i). Determine the
position of the mounting brackets (b) according
to the housing dimensions and the height of the
projection screen. Draw a straight line to install
the two mounting brackets ensuring they are
level. Use the mounts as a template and mark
the holes with a pencil on the ceiling. Drill holes
according to the markings with an 6mm drill and
insert the dowels into the drill holes. Attach the
mounting bracket to the ceiling with the universal
screws (c).
Ceiling mounting - Option 1
ATTENTION! Make sure that you use a stable surface
