54
Step 3
Carefully place the previously secured inner frame with 2 people, centered as well
as possible on the projection fabric.
Start with one corner, using 4 springs, the fabric can be attached using the tension
rods and springs. Use the clamping aid and carefully pull the springs around the
frame and anchor the springs in the rear of the frame profile. The fabric is carefully
drawn around the frame. This must be done with 2 people, one person anchors
the fabric and a second person helps guide the fabric around the frame to avoid
damage/deformation of the fabric. Now repeat the process with the other corners.
When the 4 corners are connected: Start on the long sides in the middle and
anchor further springs working towards the edges. Then do the same (working
from the middle to the edges) on the shorter sides of the frame.
(Before doing this, If you have a six piece frame,screw the two frame reinforcements
to the long frame pieces on the rear of the frame.)
Step 4
Slide the outer (velor) frame pieces onto the screen and connect them with the
corner connectors in all 4 corners. Screw the inner and outer frame together. If you
hear a "click", the frame parts are sufficiently connected.
Caution:
Be very careful when
attaching the fabric, do not rub or
scratch it on the frame. Carefully
connect the tension rods.
Assembly of the screen
