manualshive.com logo in svg

Celestron Ultima 8, Instruction Manual

Share
Download
Celestron Ultima 8 Instruction Manual Download Page 11

11

Turning Tracking On

To turn tracking on or off, start at the SETUP menu.  The instructions below will start there.  Here is how to do it:

ACTION

NOTES

DISPLAY

Get to the SETUP menu.

MENU
SETUP

Press ENTER

Speed could be at FINDER, PHOTO,
or 2 X SDRL.  It defaults to the last
setting used.

SPEED
CENTER
(will be at the last
setting)

Press DOWN

Scrolls through the different setup
functions.

TRACKING
OFF

Press ENTER

Moves the cursor to “O” of OFF.
This makes it possible to change the
tracking state of the telescope.

TRACKING
OFF

Press DOWN

Set the telescope motors to track in
Alt-Az rates.  If the scope is on a
wedge, then set tracking to EQ
NORTH or EQ SOUTH.

TRACKING
ALT AZM

Press MENU

Returns to main menu.

MENU
SETUP

Finding Objects

To use this section, the telescope has to be aligned to the sky.  See the previous reference section.  This quick reference
will show you how to find stars, Messier objects and Planets.  For more information, see the Section “Menu Catalog” in
Chapter 5.

ACTION

NOTES

DISPLAY

Go to the CATALOG Menu

MENU
CATALOG

Press ENTER

Enter the Named star list in the
Catalog menu.

NAMED
STAR

Press ENTER and UP/DOWN to find a
star that is up.  example, Arcturus
Press Down 11 times

1416+191
ARCTURUS
(example star)

Press ENTER, wait 1/2 second and press
ENTER again.

The telescope will slew to the object.

1416+191
ARCTURUS
(example star)

Find Messier Objects

Press MENU, press ENTER, press UP four
times

Returned to the Menu Catalog, enter
the Menu Catalog, and scroll through
the different catalogs until the
Messier catalog comes up.

M    001

Choose a Messier object that is up.
Consult a star atlas. example: M13
Press ENTER two times

The second zero is blinking.  Use the
UP/DOWN arrows to change it.

M    001

Press UP

M    011

Press ENTER and then UP two times

M    013

Press ENTER, wait 1/2 second and press
ENTER again.

The telescope slews to the chosen
Messier object

GO TO
SLEWING

Summary of Contents for Ultima 8


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands