Celestron TrailSeeker, Instruction Manual

Page: 4 / 52

4
I
ENGLISH
EYECUP ADJUSTMENT
Zoom and Wide Angle Eyepiece
The zoom/wide angle eyepiece of the TrailSeeker features
a twist-up eyecup to accommodate both eyeglass and non-
eyeglass wearers (Fig. 4). If you do not wear eyeglasses, twist
the eyecup clockwise until it reaches the up position. If you
wear eyeglasses, make sure that the eyecup is in the down
position to obtain the maximum field of view. The eyecup can
be set at positions between fully up and down which may suit
some users better.
Long Eye Relief (LER) Eyepiece
The LER eyepiece features a rubber eyecup to accommodate
eyeglass and non-eyeglass wearers. If you do not wear
eyeglasses simply position your eye behind the eyecup. If you
wear eyeglasses you will need to remove the eyecup to obtain
the maximum field of view. To remove the eyecup, simply pull
it towards you and off of the eyepiece.
CHANGING THE MAGNIFICATION (ZOOM EYEPIECE)
To change the magnification of the zoom eyepiece simply rotate
the eyepiece in the counterclockwise direction to increase the
magnification and clockwise to decrease the magnification
(Fig. 5). When changing magnification the scope will need to
be refocused. The largest field of view and brightest images
will always be at the lowest magnification.
Fig. 4
Fig. 5