With the eyecup of the binocular twisted down to it’s lowest position:
USING THE
SMARTPHONE ADAPTER
CAUTION: Do not carry the binocular with the smartphone adapter in place as
it may be accidentally bumped and fall off, potentially damaging the
smartphone as a result.
3
(A)
(B)
(C)
(D)
(E)
FRONT
BACK
1.
Before attaching the adapter, look through your optic binocular, and
make sure that the view is in sharp focus.
2.
Open the
eyepiece clamp (B
) by loosening the
eyepiece clamp knob (A
)
at the top of the eyepiece clamp.
3.
Place the eyepiece clamp over the eyepiece of your optic. Tighten
the eyepiece clamp knob to secure the eyepiece clamp tightly
against the eyepiece
.
NOTE:
Make sure to mount the clamp on a section of the eyepiece
barrel that does not rotate freely, such as an eye relief
adjuster.
4.
Loosen the
holder clamp knob (D)
until the
holder clamp (C
) is open
wide enough to accommodate the width of your phone. Once the phone
is in place, tighten the holder clamp knob until the phone is secured.
NOTE:
This adapter can be used with most phone cases, but the case
surface MUST be flat so it will fit in the holder correctly. Any
grips, stands, rings, or raised surfaces on the case will impede
the placement of the phone. All folio-style phone cases must
be removed.
5.
Launch the camera app on your phone. Loosen the
holder alignment
knob (E)
and adjust the positioning of your phone camera so that it
lines up with the eyepiece of your optic.
6.
Once the camera is over the eyepiece and your camera is capturing the
view through the eyepiece, carefully tighten the holder alignment knob to
secure your phone in position.
7.
If needed, adjust the focus on your optic again for the sharpest
possible view.
8.
You are now ready to take images and videos using your smartphone
camera!
IMPORTANT:
always be certain the eyepiece clamp knob is sufficently
loosened before attempting to remove the adapter from the binocular’s
eyepiece
