background image

 

CELESTRON TWO YEAR WARRANTY 

 

A.  Celestron  warrants this telescope to be free from defects in materials and workmanship for two years.   Celestron will repair or replace such product or part 

thereof which, upon inspection by  Celestron, is found to be defective in materials or workmanship. As a condition to the obligation of  Celestron to repair or 
replace such product, the product must be returned to  Celestron together with proof-of-purchase satisfactory to  Celestron. 

 
B.  The Proper Return Authorization Number must be obtained from  Celestron in advance of return.  Call Celestron at (310) 328-9560 to receive the number to be 

displayed on the outside of your shipping container. 
 
All returns must be accompanied by a written statement setting forth the name, address, and daytime telephone number of the owner, together with a brief 
description of any claimed defects.  Parts or product for which replacement is made shall become the property of Celestron. 
 

The customer shall be responsible for all costs of transportation and insurance, both to and from the factory of  Celestron, and shall be required to 
prepay such costs. 

 
 Celestron shall use reasonable efforts to repair or replace any telescope covered by this warranty within thirty days of receipt. In the event repair or replacement 
shall require more than thirty days,  Celestron shall notify the customer accordingly.   Celestron reserves the right to replace any product which has been 
discontinued from its product line with a new product of comparable value and function. 
 

This warranty shall be void and of no force of effect in the event a covered product has been modified in design or function, or subjected to abuse, 
misuse, mishandling or unauthorized repair.  Further, product malfunction or deterioration due to normal wear is not covered by this warranty. 

 
CELESTRON DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WHETHER OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR 
USE, EXCEPT AS EXPRESSLY SET FORTH HEREIN. 
 
THE SOLE OBLIGATION OF CELESTRON UNDER THIS LIMITED WARRANTY SHALL BE TO REPAIR OR REPLACE THE COVERED PRODUCT, IN 
ACCORDANCE WITH THE TERMS SET FORTH HEREIN.   CELESTRON EXPRESSLY DISCLAIMS ANY LOST PROFITS, GENERAL, SPECIAL, 
INDIRECT OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM BREACH OF ANY WARRANTY, OR ARISING OUT OF THE USE OR 
INABILITY TO USE ANY CELESTRON PRODUCT. ANY WARRANTIES WHICH ARE IMPLIED AND WHICH CANNOT BE DISCLAIMED SHALL BE 
LIMITED IN DURATION TO A TERM OF TWO YEARS FROM THE DATE OF ORIGINAL RETAIL PURCHASE. 
 
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied warranty lasts, so the above 
limitations and exclusions may not apply to you. 
 
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 
 
 Celestron reserves the right to modify or discontinue, without prior notice to you, any model or style telescope. 
 
If warranty problems arise, or if you need assistance in using your telescope contact: 

 

 

Celestron 

 

Customer Service Department 

 

2835 Columbia Street 

 

Torrance, CA 90503 

 

Tel. (310) 328-9560 

 

Fax. (310) 212-5835 

 

Monday-Friday 8AM-4PM PST 

 

 

This warranty supersedes all other product warranties. 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE:  This warranty is valid to U.S.A. and Canadian customers who have purchased this product from an Authorized  Celestron Dealer in the U.S.A. or 
Canada.  Warranty outside the U.S.A. and Canada is valid only to customers who purchased  from a  Celestron  Distributor or Authorized  Celestron Dealer 
in the specific country and please contact them for any warranty service 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Printed in China 

 

 

 

 

 

 

 

 

 

 

 

 

05-03

 

Summary of Contents for 21067

















Reviews: