Celestix E6600, Installation Manual

Page: 25 / 68

24 E Series Installation Guide
4. Hostname and Domain
Note: Fields will be autopopulated with available settings if the appliance was joined to the domain
previously; the reboot will be skipped if they are left unchanged.
▪
Hostname
– specify a name for the appliance; it must be unique.
For example:
Celestix Edge
▪
Domain
– enter the name for the internal domain the appliance will join.
For example:
example.com
.
▪
Username
– enter an account with domain administrator access to AD (domain\username).
For example:
example\adminuser
▪
Password
– provide the account password.
5. Reboot
▪
Click Next to apply changes and reboot the appliance.
Note: Domain administrator credentials (example:
example\adminuser
) will be required
to access the web UI after the reboot.
6. Alerts Email
– optional; general appliance notifications can be sent to designated recipients
through a connection to a network SMTP server.
a. Select Enable alert email .
b. Complete the following:
•
Alert Message settings
▪
To
– indicate one or multiple recipients. For multiple addresses, use a comma
to separate addresses.
▪
From
– enter an address that recipients will recognize.
▪
Select check boxes for the alert levels that will generate email.
o
Send error alert email
– includes alert types where the level is set to
Error.
o
Send warning alert email
– includes alert types where the level is set
to Warning.
o
Send informational alert email
– includes types where the level is set
to Information.
•
SMTP server settings
▪
Name
– indicate the network SMTP server name or IP address.
▪
Port
– enter the number used for SMTP communication.
▪
Use SSL/TLS
– select to require encryption.
▪
SMTP settings
– select and provide credentials with permission to access the
SMTP server.
▪
Send Test Message
– create a test email using the settings entered above.
Note: The alert email function will indicate whether a test email was sent. If the
test email is not received after the alert email feature indicates that one was
sent, the error is most likely due to SMTP server settings. An error will occur if
the SMTP service is not running or if the appliance is not correctly configured
to see the SMTP server. Confirm the SMTP server and network settings
before trying to test again.
c. Click Save to add configuration.
The wizard is complete when the congratulations screen displays.
Install Features
Once general setup and configuration are complete the Features configuration tool installs the roles and
services necessary for Celestix Edge E Series Appliance remote connectivity. Depending on the purpose
for deployment, one or more roles can be installed. Instructions cover the steps common to most
deployments, but again, an individual organization may require different or additional configuration.