ASSEMBLING THE TREE
Step 1. Remove the protective caps from the tree bottom and insert the pole
into the tree stand.
Step 2. Continue by inserting the upper tree section(s) to the lower section(s)
until inserting the tree top.
Step 3. Shape the branches to your preference by working from the bottom to
the top. When adjusting branches, ensure that all wires are free of
branch hinges.
Step 4. Plug the extension cord into the wall outlet. All your lights should now
be lit.
Step 5. Shape the tree from the bottom to the top. Start with the branches
farthest from the pole – fan out in a star shape, and continue until the
entire tree is shaped.
Step 6. Just slightly upsweep and shift branches to fill in any gaps for a fuller,
uniform look. Your Christmas tree is now ready to be decorated.
Assembly / Operation Instructions
ASSEMBLING THE TREE STAND
Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand (C) and lay the stand on the floor.
Step 3. To close the stand (C), press the metal button and fold the legs together.
Top view
Side view
* Electrical Rating For The Tree
(For Indoor Use Only)
120V, 60Hz, 0.48A
Click
MAINTENANCE
SPARE PARTS: This tree package includes hinge pins, washers, bulbs for any replacement or repair that you need to perform on your tree.
If extra parts are needed, contact the Customer Service Team at 1-888-919-0070 between the hours of 8 am and 5 pm MST, Monday through Friday.
REPAIRING LOOSE HINGES
Step 1. Place the branch into the slot of the bracket.
Step 2. Insert a new hinge pin through the holes of the bracket and secure with a washer.
LAMP REPLACEMENT
Step 1. Grasp the power adapter or power cord plug, and then unplug from the power outlet.
Do not pull the power cord.
Step 2. Lift up lamp lock tab, then pull the lamp and plastic lamp base straight out of the lamp-holder.
Step 3. Replace with a new lamp provided with products.
TROUBLESHOOTING TIPS
FOR PRE-LIT TREES, IF THE TREE DOES NOT ILLUMINATE
1. Please check to make sure that all connectors are properly connected and the power adapter cord is plugged into the wall outlet.
2. Check for loose connection between light string plugs and extension cords.
3. Please check for loose, broken or missing light bulbs and replace as needed.
Reference figure only
Troubleshooting / Storage / Maintenance Instructions
Tree Top
Section 1
Insert
Green Label
Plug Into Wall
Outlet
Assemble
Red Labels
Together
