background image

ASSEMBLING THE TREE

Step 1. Remove the protective caps from the tree bottom and insert the pole 

into the tree stand.

Step 2. Continue by inserting the upper tree section(s) to the lower section(s) 

until inserting the tree top.

Step 3. Shape the branches to your preference by working from the bottom to 

the top. When adjusting branches, ensure that all wires are free of 

branch hinges.

Step 4. Plug the extension cord into the wall outlet. All your lights should now 

be lit.

Step 5. Shape the tree from the bottom to the top. Start with the branches 

farthest from the pole – fan out in a star shape, and continue until the 

entire tree is shaped.

Step 6. Just slightly upsweep and shift branches to fill in any gaps for a fuller, 

uniform look. Your Christmas tree is now ready to be decorated.

Assembly / Operation Instructions

ASSEMBLING THE TREE STAND

Step 1. Choose a location near a wall outlet.

Step 2. Unfold the legs of the tree stand (D) and lay the stand on the floor.

Step 3. To close the stand (D), press the metal button and fold the legs together.

Top view

Side view

* Electrical Rating For The Tree

  (For Indoor Use Only)

  120V, 60Hz, 0.51A

Section 1

Section 2

Tree Top

Click

MAINTENANCE

SPARE PARTS: This tree package includes hinge pins, washers, bulbs for any replacement or repair that you need to perform on your tree. 

If extra parts are needed, contact the Customer Service Team at 1-888-919-0070 between the hours of 8 am and 5 pm MST, Monday through Friday.

LAMP REPLACEMENT

Step 1. Grasp the power adapter or power cord plug, and then unplug from the power outlet. 

             Do not pull the power cord.

Step 2. Lift up lamp lock tab, then pull the lamp and plastic lamp base straight out of the lamp-holder.

Step 3. Replace with a new lamp provided with products.

TROUBLESHOOTING TIPS

FOR PRE-LIT TREES, IF THE TREE DOES NOT ILLUMINATE

1. Please check to make sure that all connectors are properly connected and the power adapter cord is plugged into the wall outlet.

2. Check for loose connection between light string plugs and extension cords.

3. Please check for loose, broken or missing light bulbs and replace as needed.

Reference figure only

Troubleshooting / Storage / Maintenance Instructions

Insert

Green Label

Plug Into Wall

Outlet

Assemble

Yellow Labels

Together

Assemble

Red Labels

Together

Reviews: