background image

English

   - 2 -

Safety Information

Don’t operate your TV in extreme ambient 

conditions as this may cause damage to your TV.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: 

TO REDUCE THE RISK OF ELECTRIC SHOCK DO 

NOT REMOVE COVER (OR BACK). 

NO USER-SERVICEABLE PARTS INSIDE. REFER 

SERVICING TO QUALIFIED SERVICE PERSONNEL.

Note:

 Follow the on screen instructions for operating the 

related features.

In extreme weather (storms, lightning) and long 

inactivity periods (going on holiday) disconnect 

the TV set from the mains. The mains plug is 

used to disconnect TV set from the mains and 

therefore it must remain readily operable.
This sign is present wherever there is very 

important information on operation and 

maintenance of the appliance in the literature 

accompanying it.

 IMPORTANT - Please read these 

instructions fully before installing or 

operating

 

WARNING: Never let people (including 

children) with reduced physical, sensory or 

mental capabilities or lack of experience and / or 

knowledge use electrical devices unsupervised.

• 

For ventilation purposes, leave a free space of at 

least 10 cm all around the set. 

• 

Do not 

block ventilation holes. 

• 

Do not

 place the TV on sloping or unstable surfaces, 

the TV may tip over.

• 

Use this device in moderate climates.

• 

The power cord plug should be easily accessible. 

Do 

not 

place the TV, furniture, etc. on the power cord. 

A damaged power cord/plug can cause fire or give 

you an electric shock. Handle the power cord by the 

plug, 

do not

 unplug the TV by pulling the power cord. 

Never touch the power cord/plug with wet hands 

as this could cause a short circuit or electric shock. 

Never make a knot in the power cord or tie it with  

other cords. When damaged it must be replaced, 

this should only be done by qualified personnel.

• 

Do not

 use this TV in a humid or damp environment. 

Do not expose the TV to liquids. In case the cabinet 

contacts any liquids unplug the TV immediately 

and have it checked by qualified personnel before 

operating it any further.

• 

Do not

 expose the TV to direct sunlight, 

open flames or place it near intense heat 

sources such as electric heaters.

• 

Listening in excessive volumes from earphones and 

headphones may cause hearing loss.

• Ensure  that  no  open  flame  sources,  such  as  lit 

candles, are placed on top of the TV.

• 

To prevent injuries, this TV must be securely 

attached to a wall by carefully following the 

instructions (if the option is available).

• 

Occasionally, a few non-active pixels may appear 

on the screen as a fixed blue, green or red point. 

Please note that this does not affect the performance 

of your product. Take care not to scratch the screen 

with fingernails or other hard objects. 

• 

Before cleaning, unplug the TV from the wall socket. 

Only use a soft, dry cloth while cleaning.

Warning:

 Batteries must not be exposed to excessive 

heat such as sunshine, fire or the like.

 Warning

Serious injury or death risk

 

Risk of electric shock Dangerous voltage risk

 

Caution

Injury or property damage risk

 Important

Operating the system correctly

 

Notice

Additional notes marked

Markings on the Product

The following symbols are used 

on the product

 as 

a marker for restrictions and precautions and safety 

instructions.  Each explanation shall be considered 

where the product bears related marking only. Note 

such information for security reasons.

Class II Equipment:

 This appliance is 

designed in such a way that it does not require 

a safety connection to electrical earth.

Class II Equipment With Functional 

Earthing:

 This appliance is designed in such 

a way that it does not require a safety 

connection to electrical earth, the earth connection is 

used for functional purposes.

Protective Earth Connection:

 The marked 

terminal is intended for connection of the 

protective earthing conductor associated with 

the supply wiring.

Hazardous Live Terminal: 

The marked 

terminal(s) is/are hazardous live under normal 

operating conditions.

Caution, See Operating Instructions:

 The 

marked area(s) contain(s) user replaceable 

coin or button cell batteries.

Class 1 Laser Product:

 

This product contains Class 

1 laser source that is safe 

under reasonably foreseeable 

conditions of operation.

i

CLASS 1

LASER PRODUCT 

Summary of Contents for CEL-48UHDSB





























Reviews: