16
Programming Mode
This mode allows the user to assign cook times and power levels to the one touch
pads. User Option OP:90 allows for 10 single digit touch programs. User Option
OP:91 allows for 100 double digit touch programs.
NOTE: When using programmed cycles, food should be in the oven before
selecting the program as the program will start automatically after it is selected.
You do not require to press Start.
1)
Open the oven door and press and hold pad 1 for 5 seconds. Release when
the buzzer sounds and the word ProG shows in the LED display.
2)
Press the numbered pad, 0-9 that you wish to program. The LED will display
what is currently programmed.
3)
Use the number pads to enter the time you wish to program into this pad.
4)
Press 0%, 20%, 50% or 70% to change the Power Level. If no power level
selected it will set to 100% (the default).
5)
After you have set the time and power level you require for your program
press the Start pad and the cooking program is now saved. The LED will
now say ProG again.
6)
If the cooking time you are trying to set exceeds the allowed time for the
oven, when you press Start to save the oven buzzer will sound briefly 3
times to alert you and the oven will return to ProG. The program will not
have saved and you will need to return to the pad you were programming
and change the setting.
7)
From ProG you can now program other pads for Preset Cooking Programs
or you can close the oven door and the oven will return to ready Mode.
8)
If you press STOP/Reset during your programming the oven will return to
Ready Mode and your program will not be saved.
9)
If a pad has no program saved to it, when you press the pad from Ready
Mode, the oven buzzer will sound and no cook cycle will start.
NOTE: If there is a power cut, no programs will be lost. If the oven is unplugged,
no programs will be lost. If the oven is unplugged and moved no programs will be
lost.
Summary of Contents for CMD1000T
Page 2: ...1...
