Celco Spider67, Manual

Page: 36 / 68

Assembly and installation
2020/7/V1.0 36 | 68 Manual-No.: 10001_hdb_en
5.6.2 I/O connections for sensors/actuators or expansion modules
ATTENTION
Device defect due to excessive total current!

When connecting the expansion modules, observe the maximum total current
of 4 A.
Connect extension module or sensor to I/O
connections

Elco M12 connector, B-coded or M12 field
wiring connector, B-coded.

Torque spanner M12

Torque: 0,8 Nm

Screw the M12 plug firmly onto the
socket.
Connecting antennas
Connecting antennas to SMA socket

SMA torques spanner

Torque: 1 Nm

Screw the SMA plug of the WLAN
antenna onto the SMA socket
„WLAN“.

Screw the SMA plug of the mobile
radio antenna onto the SMA socket
„LTE“.
5.7 WLAN communication (gateway with WLAN antenna)
Connect WLAN

Requirement: The unit is switched on and runs stable!

Use the Spider67 (m) app. It is available under Android and iOS.

Follow the instructions of the app Spider67 (m).