Celco Spider67, Manual

Page: 18 / 68

Hardware
2020/7/V1.0 18 | 68 Manual-No.: 10001_hdb_en
4 HARDWARE
4.1 Hardware environment
⚫
Server
Servers running the IoTHub and the Spider67 Mobile application platform (cloud version, local
server version) and related software and network support resources.
⚫
Computer/web access and Android/iOS mobile devices
We recommend a computer with a Google Chrome Browser to configure the user platform. An
Android or iOS device is required to configure the hardware.
⚫
Hardware-1-Set for Spider67 Mobile
A gateway and the required antennas are included in the standard delivery. Expansion
modules and supporting connection components are not included in the scope of delivery.
⚫
WLAN router
When using WLAN, the user must provide a WLAN access point.
⚫
SIM card
The integrated eSIM is installed in the module as standard ex works and can be activated. A
separate mobile phone contract with Elco must be concluded for this purpose.
⚫
M12 cables
For the intended use of the Spider67 Mobile, the terminating resistor and the system bus
cables must be obtained from Elco! The use of these components from a third-party
manufacturer leads to the loss of the warranty. I/O connectors can be obtained from third party
manufacturers or from Elco.
4.2 Net work environment
4.2.1 Mobile and WLAN network
The configuration and data transmission of the Spider67 Mobile Gateways requires the support of the
network environment. For the mobile gateway an appropriate mobile network (2G, 3G and 4G) must
be provided.
Depending on the configuration, the WLAN version of the gateway requires the local WLAN router to
provide the access point (AP).
INFO
SPMB-16DIO series products sold in the European Union must be activated by a
mobile phone contract. Only then they are supported by the network partner.