Celco Spider67, Manual

Page: 11 / 68

Safety instructions
2020/7/V1.0 11 | 69 Manual-No.: 10001_hdb_en

Operation outside the technical specifications of the product (see type plate and technical
data) can lead to a defect and cause further damage!

The product and its accessories may only be installed and operated in perfect condition and
in accordance with the operating instructions.

Respect the local regulations and ordinances during planning, installation and
commissioning!
2.4 Requirements for persons performing the work
Only electrical qualified personnel may install, operate and maintain the Spider67 mobile radio system.

Follow the described instructions for installation, operation and maintenance.
Danger of injury in case of insufficient qualification!
Improper handling can lead to considerable personal injury and material damage.

Have all activities carried out by qualified personnel only.

Carry out safety and environmental protection instructions at regular intervals.

Inform external persons in detail about the dangers.
2.5 Danger due to electrical voltage
During operation, certain parts of the equipment may be under dangerous voltage!

Observe the warnings.

Provide a switch/circuit breaker near the unit, which is marked as the disconnecting device
for this unit or all electronics in the field or control panel.

Provide an overcurrent protection device (
I ≤ 6 A) in the installation.

Disconnect the unit from all power sources during maintenance and configuration (the unit
can remain connected to SELV or PELV circuits).

Close all electrically conductive parts with a suitable end cover before operation.
2.6 Interventions and changes to the unit
Modifications to the hardware and firmware of the Spider67 mobile radio system are not permitted.
Improper work or modifications to the Spider67 Mobile Radio System may endanger your safety or
damage the device.

You may not repair the Spider67 mobile radio system.

If the Spider67 mobile radio system is damaged, contact Elco Industrie Automation GmbH.

Elco Industrie Automation GmbH is not reliable for any damage resulting from
contravention.